Packet Tracer Project 4 Static Route

   For project 4 I had to create the topology above. Using packet tracer. We have been using packet tracer a lot for the past weeks. It wasnt really anything new. The topology has four 1941 Routers. I named them New york, Boston, Vegas, and Boarder; Four pc's, 7 networks, and four 2950T-24 switches. 

   The routers are configured staticly. To connect the topology I used a series of cables. Cables dce for routers so we could use clocks and straight-through cables for the switches and pcs. To make sure everything was working from what you can see from the picture all the lights have to be green. Turning on all ports will make sure the cables can connect the devices.  I configured gateways to the pcs. This will help the computers to send and receive information from the networks. After, I pinged the pcs. The pings will check the computers, routers and connectivity.  so many steps for just one topology. 

 From configuring routers and setting ip addresses to connecting devices using cables I was finally done.  making sure that everything was done correctly including the set up of the passwords,  ip addresses, subnet masks,  indicating interfaces just to prevent hackers from entering. I actually had fun doing this project i knew the basics and what to do from the previous projects. Which I think helped me out a lot and i'm happy to say it liked it.